BIOLOGICAL WASTEWATER TREATMENT SYSTEMS

SBR technology

1. Filling stage: A portion of the wastewater that has been collected in the pre-treatment tank, and its solids are transferred to the aeration tank.
2. Aeration Stage: Wastewater is alternately aerated and mixed into the polyethylene tank. Thus, activated sludge is formed which contains the microorganisms needed for wastewater treatment. Aeration and rest times can be adjusted based on actual biological needs. The excess sludge is transferred to the primary treatment tank and then discharged with the sewage sludge. If no wastewater is added during the aeration phase, the system automatically switches to energy storage mode.
3. Sedimentation stage: The activated sludge settles on the bottom of the aeration tank. Clean water is collected at the top of the tank.
4. Drain stage: Clean water is pumped out of the tank through the outlet.

SSB Technology

1. Water purification aeration stage: Inlet wastewater enters the first polyethylene tank. Here the biological treatment of wastewater begins. Organic compounds are destroyed by active microorganisms in activated sludge. You can also do the denitrification process by your choice. In addition, the coarse materials remain in the first polyethylene tank.
2. Settlement stage: Biological treatment of the sewage is also carried out in the second polyethylene tank. At the same time, the tank also performs the final settling function by periodically controlling the system. The activated sludge settles on the bottom of the aeration tank and is then the clean water is at the top of the tank.
3. Discharge step: Pumping the treated wastewater out through the outlet

Pump Technology 

• Safe operation due to modern technology
• High durability due to the quality of components
• Easy to operate with ready-to-use parts
• Suitable for any polyethylene tank
• The highest flexibility due to the special adjust-ability
• Low maintenance costs for easy operation
• Energy efficiency with proper operation
• Saving energy for economic reasons
• Low noise of pumps and aerators

The sewage pump is equipped with the latest technology and can be installed at altitudes and thus it can be connected to the wall of all polyethylene containers. It can be diverse and flexible due to various reasons for its operation (chained / partitioned joints).

Why Disinfection with UV?

With the use of ultraviolet technology, you get the highest quality of treatment. The valuable water extracted from this treatment plant can now be used. For example, usable in irrigating green spaces of homes. This process, with no complexity and at the best price, brings you environmental protection.

The most modern technology for the future of pollution

• This disinfectant tool is an effective, modern, and especially environmentally-friend device that highlights the importance of solar energy in nature.
• UV radiation destroys pathogenic microorganisms within seconds without any residue, undesirable by-products, and impact on odor or taste.