Drainage polyethylene pipe
Double-wall polyethylene pipes with core-tube can also be used as drainage pipes. In this way, according to the desired design, holes are created in the body of the pipe and drainage is performed. These polyethylene pipes have different uses:
- Surface water drainage
- Garbage leachate collection
- Drainage with uses
The advantages of double-wall drainage polyethylene pipes with core-tube are the same as other double-wall polyethylene pipes.
In environments such as streets, buildings, parking lots, etc. where soil is covered and these places are fed by rainwater, drainage systems are required. Therefore, ground water settling on the one hand, and overuse of the plumbing system on the other hand, are not permitted.
Tadbir Novin Sazan polyethylene pipe system with core-tube provides a design for various types of structural elements to provide the optimal solution for each case.
-
Polyethylene Drainage Pipe
Double-wall polyethylene pipes are available in diameters from 300 mm to 4000 mm. The standard production length for pipes is 6 meters and pipes can have spigot and socket for easy connection. There is a variety of holes’ size available.
-
Polyethylene Drainage Shaft
The lower/end part of the shaft can be produced with or without a hole. On the outside of the shafts, there are pipes for connecting with other pipes. The standard length of the structure is 100mm plus the nominal diameter (DN) of the pipe. If the interface chamber is added to the shaft, its depth by standard is 500 mm (calculated from the bottom of the pipe).
-
Polyethylene Extension Shaft
The extension component of drainage shaft has a desired length in millimeter. There is a special socket for attaching to the upper edge of the drainage shaft. The shaft and extension component are fixed on top of the perimeter and a cover is mounted over it.
Polyethylene shafts of Tadbir Novin Sazan Company can be installed up to very high heights.